服務熱線電話
400-6188-756
全自動超聲波清洗機設備比人工洗好在哪?
來源:http://www.szoudao.com/ 時間: 2021-06-17 瀏覽次數: 0
以下是對全自動超聲波清洗機設備總結的幾個優點:
The following are the advantages of the automatic ultrasonic cleaning machine
一、速度快、效果好
1、 Fast and effective
工業機器的傳統清洗采用的是浸泡、蒸汽等耗費大量時間的方法,而且清洗的還不均勻,有口皆碑的超聲波清洗器采用的是聲波在介質中傳導使介質表面脫落的工藝,一般只需要兩到三分鐘就可以完成清洗,而且采用的聲波法其覆蓋范圍是整個介質不會留下邊邊角角,這樣清洗的設備更加干凈。
The traditional cleaning methods of industrial machines are soaking, steam, etc., which take a lot of time, and the cleaning is not uniform. The well-known ultrasonic cleaner uses the process of sound wave conduction in the medium to make the surface of the medium fall off, which generally takes only two to three minutes to complete the cleaning, And the coverage of the acoustic method is that the whole medium will not leave corners, so the cleaning equipment is more clean.


二、非接觸清洗全自動超聲波清洗機設備
2、 Non contact cleaning automatic ultrasonic cleaning equipment
傳統的清洗是浸泡在溶劑池中采用人工對物品表面進行清洗,這樣的清洗方法很難保證清洗的徹 底性和安 全性,超聲波清洗器采用的非接觸清洗可以使整個產品的溶劑中震蕩保證每一個角落都可以干凈整潔,既節省了大量人力物力也保證了清洗的徹 底。
The traditional cleaning method is to soak in the solvent pool and manually clean the surface of the goods. This cleaning method is difficult to ensure the thoroughness and safety of the cleaning. The non-contact cleaning method adopted by the ultrasonic cleaner can make the whole product vibrate in the solvent and ensure that every corner can be clean and tidy, which not only saves a lot of manpower and material resources, but also ensures the thoroughness of the cleaning.
三、節省
3、 Saving
這里提到的節省包括了清洗溶劑、熱能、場地、人工等,傳統的清洗耗費時間長需要有大量的場地來擺放溶液池,這樣造成了溶液和場地的浪費,超聲波清洗器可以做到有機溶液回收利用,因為清洗器的清洗速度快所以不需要很多溶液池共存,綜合以上三個方面超聲波清洗器在節能減排方面有很大的作用。
The savings mentioned here include cleaning solvent, heat energy, site, labor, etc. traditional cleaning takes a long time and requires a large number of sites to place solution pools, which results in waste of solution and site. The ultrasonic cleaner can recycle organic solution. Because the cleaning speed of the cleaner is fast, it does not need many solution pools to coexist, Combined with the above three aspects, ultrasonic cleaner plays a great role in energy saving and emission reduction.
全自動超聲波清洗機設備作為機器清洗的翹楚備受大家喜愛,其清洗過程對產品表面無損傷可以完好保留產品特性,微小的污漬也有可能影響整個設備的使用,超聲波清洗器的聲波處理可以做到高精度的清洗,不殘留微小的污漬顆粒。
As the leader of machine cleaning, automatic ultrasonic cleaning machine is very popular. Its cleaning process has no damage to the surface of the product and can keep the product characteristics intact. Small stains may also affect the use of the whole equipment. The ultrasonic treatment of ultrasonic cleaning machine can achieve high-precision cleaning without leaving small stains.
相關文章
-
汽車零部件清洗效率低?全自動碳氫清洗機太能打! 2025-12-20
-
通過式噴淋清洗機:影響在電子車間內流暢使用的5大影響因素 2025-12-20
-
金屬零件清洗怕踩坑?碳氫清洗機夠硬核,難題全搞定! 2025-12-19
-
50Mpa CNC高壓清洗機:強力瓦解各類油污、碎屑,工業清潔高效之選 2025-12-19
-
多槽手動超聲波清洗機:選對工業清洗設備,效率直接拉滿! 2025-12-19
-
噴淋清洗機霧氣過大?水霧收集器這樣徹底解決! 2025-12-18
-
通過式噴淋清洗機:發動機缸體定制化清洗解決方案,自動化高效賦能車企 2025-12-18
-
多孔盲孔清洗難題?碳氫清洗機憑真空技術精準破解 2025-12-18
-
CNC 高壓清洗機:50 兆帕精準沖洗,攻克油垢毛刺難題 2025-12-18
-
CNC高壓清洗機:三合一全能清洗,多行業適配的工業利器 2025-12-17

新聞中心




公司動態







魯公網安備37011202000628號