服務熱線電話
400-6188-756
超聲波清洗機廠家是如何檢測設備故障的?
來源:http://www.szoudao.com/ 時間: 2021-07-16 瀏覽次數: 0
超聲波清洗機的應用是非常廣泛的,在使用的過程中,有時候設備會出現故障。那么,到底要如何檢測超聲波清洗機的故障呢?下面幾點可以參考一下。
Ultrasonic cleaning machine is widely used, in the process of use, sometimes equipment failure. So, how to detect the fault of ultrasonic cleaning machine? The following points can be referred to.
1、如果使用超聲波清洗機的時候發現某個設定位置不能夠停止而導致動作錯誤的話,要檢查升降臂相應的感應開關有沒有異常,如果有受損或者松脫情況的要處理好。
1. If it is found that a certain set position can not be stopped when using the ultrasonic cleaning machine, which leads to action error, check whether the corresponding induction switch of the lifting arm is abnormal, and deal with it if it is damaged or loose.


2、設備上下左右行程處都有安全保護裝置,如果行程超越設置機器會停止,這時候要手動復位,重新調整好行程開關或者感應片。
2. There is a safety protection device at the up, down, left and right travel of the equipment. If the travel exceeds the setting, the machine will stop. At this time, it is necessary to reset manually and readjust the travel switch or sensor.
3、如果移動架不能正常運行,限位開關會將機器制止,這時候要手動把移動架返回到正確的位置。
3. If the moving frame can't work normally, the limit switch will stop the machine. At this time, the moving frame should be returned to the correct position manually.
除了以上幾點外,其實超聲波清洗機出現問題的情況還有很多種,遇到問題一定要及時查找原因并解決問題。
In addition to the above points, in fact, there are many kinds of problems in the ultrasonic cleaning machine, we must find out the reasons and solve the problems in time.
上一篇:分析介紹超聲波清洗機工作原理
下一篇:全自動超聲波清洗機選擇哪個廠家好
相關文章
-
汽車零部件清洗效率低?全自動碳氫清洗機太能打! 2025-12-20
-
通過式噴淋清洗機:影響在電子車間內流暢使用的5大影響因素 2025-12-20
-
金屬零件清洗怕踩坑?碳氫清洗機夠硬核,難題全搞定! 2025-12-19
-
50Mpa CNC高壓清洗機:強力瓦解各類油污、碎屑,工業清潔高效之選 2025-12-19
-
多槽手動超聲波清洗機:選對工業清洗設備,效率直接拉滿! 2025-12-19
-
噴淋清洗機霧氣過大?水霧收集器這樣徹底解決! 2025-12-18
-
通過式噴淋清洗機:發動機缸體定制化清洗解決方案,自動化高效賦能車企 2025-12-18
-
多孔盲孔清洗難題?碳氫清洗機憑真空技術精準破解 2025-12-18
-
CNC 高壓清洗機:50 兆帕精準沖洗,攻克油垢毛刺難題 2025-12-18
-
CNC高壓清洗機:三合一全能清洗,多行業適配的工業利器 2025-12-17

新聞中心




行業新聞







魯公網安備37011202000628號