As many friends know, most of the newly bought bearings are coated with grease, but the grease is mainly used to prevent the bearing from rusting and does not play a role in lubrication. However, the bearing is particularly easy to hide dirt, and it is generally difficult to thoroughly clean it. Even if the bearing is bought without lubricating oil, it will absorb dust due to magnetism and airflow after a long time. The "dirt community" is formed by mixing sweat stains, moisture, etc. in the bearing, between balls, and at the gap, which is "fatal" to the rotation of the bearing. Therefore, bearing cleaning is very important, and a powerful tool - hydrocarbon cleaning machine was introduced to solve the problem of bearing cleaning.

碳氫清洗機

Hydrocarbon washer

1、如何正確清洗軸承

1. How to Clean Bearings Correctly

使用環保碳氫清洗機，全自動清洗系統，無水化真空清洗技術，節能 環保智能柔性化，效率更高品質的清洗模式，全面除油除銹無死角清洗，輕松解決精密軸承清洗難題，無須拆卸和轉動軸承，無損傷即可去除軸承潤滑脂、黏著物、油污等臟污，還軸承一個該有的靈活性。

Using environment-friendly hydrocarbon cleaning machine, fully automatic cleaning system, anhydrous vacuum cleaning technology, energy-saving, environment-friendly, intelligent, flexible, more efficient and high-quality cleaning mode, comprehensive oil and rust removal, no dead angle cleaning, easy to solve the problem of precision bearing cleaning, no need to disassemble and rotate the bearing, no damage can be removed bearing grease, adhesive, oil and other dirt, but also the flexibility of the bearing.

2、軸承使用注意事項

2. Precautions for bearing use

軸承是精密部件，其使用也須相應地慎重進行。無論使用多么高性能軸承，如果使用不當，則不會得到預期的高性能。有關軸承的使用注意事項如下：

Bearing is a precision component, and its use must be carried out with corresponding caution. No matter how high performance bearings are used, they will not achieve the expected high performance if used improperly. Precautions for the use of bearings are as follows:

① 保持軸承及其周圍環境的清潔

① Keep the bearing and its surroundings clean

即使肉眼看不見的微小灰塵進入軸承，也會增加軸承的磨損，振動和噪音。軸承以及其周邊附件應保持清潔，特別是灰塵及污物，工具及環境也必須保持干凈。

Even if invisible tiny dust enters the bearing, it will also increase the wear, vibration and noise of the bearing. The bearing and its surrounding accessories shall be kept clean, especially dust and dirt. Tools and environment must also be kept clean.

② 使用安裝時注意事項

② Precautions for use and installation

不允許強力沖壓，不允許用錘直接敲擊軸承，不允許通過滾動體傳遞壓力。

It is not allowed to punch forcefully, strike the bearing directly with a hammer, or transmit pressure through rolling elements.

③ 使用合適、準確的安裝工具

③ Use proper and accurate installation tools

盡量使用專用工具，避免使用布類和短纖維之類的東西。

Try to use special tools, and avoid using cloth and short fiber.

④ 防止軸承的銹蝕

④ Prevent bearing corrosion

直接用手拿軸承時，要充分洗去手上的汗液，并涂以優質礦物油后再進行操作，在雨季和夏季尤其要注意防銹。不過，在某種特殊的操作條件下，軸承可以獲得較長于傳統計算的壽命，特別是在輕負荷的情況下。這些特殊的操作條件就是，當滾動面被一潤滑油膜有效地分割及限制污染物所可能導致的表面破壞。事實上，在理想的條件下，所謂永久軸承壽命是可能的。

When the bearing is directly held by hand, the sweat on the hand should be fully washed and coated with high-quality mineral oil before operation. Pay special attention to rust prevention in rainy season and summer. However, under some special operating conditions, the bearing can obtain a longer life than the traditional calculation, especially under light load. These special operating conditions are the possible surface damage when the rolling surface is effectively separated by a lubricating oil film and the pollutants are limited. In fact, under ideal conditions, the so-called permanent bearing life is possible.

真空碳氫清洗機適用范圍：

Applicable scope of vacuum hydrocarbon cleaning machine:

1.適用行業：航空航天,汽車,電子,機械,粉末治金件,微電機,文具辦公,計量器具,鐘表,有色金屬,電池,電容殼,PCB,鐘表,衛浴,運動器械等。

1. Applicable industries: aerospace, automobile, electronics, machinery, powder metallurgy parts, micro motor, stationery and office, measuring instruments, clocks, non-ferrous metals, batteries, capacitor shells, PCB, clocks, sanitary ware, sports equipment, etc.

2.被清洗物：精密機加、沖壓部件,精密機加、沖壓部件,接觸器,精密接插件,元器件金屬外殼、屏蔽罩,機加部件，含油軸承、結構件，馬達殼，筆頭，零部件，表殼加工，拉拔銅管，殼體成型，電容鋁殼，PCBA，微馬達、轉子，表帶、表殼，水龍頭、花灑，高爾夫球桿等。

2. Cleaned objects: precision machining and stamping parts, precision machining and stamping parts, contactors, precision connectors, metal shells of components, shielding covers, machining parts, oil-bearing bearings, structural parts, motor shells, pens, parts, watch case processing, drawing copper tubes, shell forming, capacitor aluminum shells, PCBA, micromotors, rotors, watch straps, watch cases, faucets, showers, golf clubs, etc.

3.清洗主要污物：切削油,拉升油,沖壓油,攻絲油,加工金屬削,非金屬顆粒,防銹油,碳芯粉,樹脂,助焊劑等高粘度物質,拋光蠟等。

3. Clean the main dirt: cutting oil, lifting oil, stamping oil, tapping oil, metal cutting, non-metallic particles, antirust oil, carbon core powder, resin, flux and other high viscosity substances, polishing wax, etc.

以上就是為大家介紹的有關碳氫清洗機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.szoudao.com

The above is a detailed introduction to the hydrocarbon cleaning machine. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.szoudao.com