超聲波清洗機不震動可能存在的5大原因：
There are five possible reasons why the ultrasonic cleaner does not vibrate:
電源是否完好，看看超聲波發生器有電進來沒，面板無顯示的話，查查進來的電源有問題沒有；
Check whether the power supply is in good condition. Check whether the ultrasonic generator has power. If there is no display on the panel, check whether there is any problem with the power supply;
超聲波發生器灰塵過多，或受潮，導致一些電路不暢，需清理超聲波發生器內部；
There is too much dust or moisture in the ultrasonic generator, which causes some circuits to be blocked. It is necessary to clean the inside of the ultrasonic generator;
超聲波清洗機的使用壽命過長，導致超聲波換能器已經老化，需要更換全新?lián)Q能器；
The service life of the ultrasonic cleaning machine is too long, resulting in the aging of the ultrasonic transducer, which needs to be replaced with a new one;
超聲波發生器后面的保險絲或線路板上的保險絲是否燒掉；
Whether the fuse behind the ultrasonic generator or the fuse on the circuit board is burnt out;
超聲波換能器經過長期高溫清洗，可能有脫膠或者膠水開裂現象。
After long-term high-temperature cleaning, the ultrasonic transducer may have degumming or glue cracking.

超聲波清洗機震動小的5大原因：
Five reasons for low vibration of ultrasonic cleaner:
使用時間比較長，換能器老化，性能衰減，維修方法可以適當增大超聲波功率，但是這種方法會造成換能器的發熱量增大，不能根本解決問題，建議更換全部換能器；
The service time is relatively long, the transducer is aging, the performance is decaying, and the maintenance method can appropriately increase the ultrasonic power, but this method will increase the heat output of the transducer, which cannot fundamentally solve the problem. It is recommended to replace all the transducers;
超聲波發生器與換能器頻率點跑偏；
The frequency point of ultrasonic generator and transducer deviates;
部分換能器損壞，將壞的換能器更換于之匹配的換能器；
Some transducers are damaged. Replace the damaged transducer with the matched transducer;
清洗機工作環境，比如清洗劑種類，清洗溫度，液位深淺等的影響；
The impact of the working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level depth, etc;
被清洗物的擺放方式，清洗劑的更換等。
The placement of the cleaned objects, the replacement of cleaning agents, etc.
綜上所述，造成超聲波清洗機不震動或者振動小，很大幾率都是超聲波換能器和超聲波發生器的問題，且一般而言如果購買的是一臺質量合格的超聲波清洗設備，那么出問題的幾率是很小的，并且質量好的超聲波清洗機其廠家售后一般也是優良的，完全不用擔心遇到故障無法處理。
To sum up, the reason why the ultrasonic cleaning machine does not vibrate or vibrates little is the problem of the ultrasonic transducer and the ultrasonic generator. Generally speaking, if you buy a qualified ultrasonic cleaning equipment, the probability of the problem is very small, and the after-sales service of the manufacturer of the ultrasonic cleaning machine with good quality is generally excellent, so you don't have to worry about the failure.
有了超聲波清洗機上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://www.szoudao.com或者來電咨詢，我們會盡全力為您解決
With the summary above, we hope to help our customers. If you have any questions or need help, please click our website: http://www.szoudao.com Or call for consultation, and we will do our best to solve it for you